Jotafloor PU Topcoat is a high performance, high solids, non-yellowing, isocyanate-cured polyurethane coating supplied in two-pack form.
This light-duty coating is built to resist chemicals, abrasions, impact and sun damage. It is therefore suitable for a diverse range of floors with various levels of mechanical and chemical exposure.
Due to its good weathering resistance, Jotafloor PU Topcoat is recommended for use on concrete floors in car parks, parking bays, pedestrian walkways, driveways, ramps and traffic deck systems. It is specially designed for gloss and colour retention in areas that are exposed to direct sunlight. The product also works well in commercial buildings and residential buildings.
As with other Jotun products, this topcoat comes in a wide array of colours through Jotun’s Multicolor Industry™(MCI) tinting system. The two-pack coating is also easy to apply, and it’s specially designed for use on approved primers.
In areas where slip-resistance is required, Jotafloor Non-Slip Aggregate (fine or medium) can be used in the system. The aggregate gives a textured finish and enhances the safety of users. The Jotun technical service team is dedicated to helping with every aspect of the installation process.
Determination of Elongation - ASTM D2730
Determination of ease of decontamination - BS4247 Part 1:1987
This product contributes to Green Building Standard credits by meeting the following specific requirements:
LEED®v4 (2013)
MR credit: Building product disclosure and optimization
- Material Ingredients, Option 2: Material Ingredient Optimization, International Alternative Compliance Path -
REACH optimization: Fully inventoried chemical ingredients to 100 ppm and not containing substances on the REACH Authorization list – Annex XIV, the Restriction list – Annex XVII and the SVHC candidate list.
- Environmental Product Declarations. Product-specific Type III EPD (ISO 14025;21930, EN 15804).
SS Credit: Heat Island Reduction
Selected colour(s) of this product meets the requirements of:
SRI of at least 39 for steep-sloped roof
SRI of at least 39 for parking roof covering
BREEAM® International (2016)
- Mat 01: Product-specific Type III EPD (ISO 14025;21930, EN 15804).
BREEAM® International (2013)
- Hea 02: VOC content for Two-pack performance Coatings SB (500 g/l) (EU Directive 2004/42/CE).
For more detailed and specific information about the standards, certificates and other documentation please see TDS or contact your local Jotun representative.
A three-component, amine cured solvent free epoxy screed designed as a moisture barrier.
Jota Armour is a tough, abrasion resistant coating designed as an anti-skid coating for decks and walkways.
A high performance, two-component polyamide-cured epoxy coating, offering both durability and style.
Jotafloor Topcoat E is a high-performance, two-component, amide-cured, solvent-free epoxy coating.
A video is being shown